Page 1 of 4

Some news about A-bike mark II

PostPosted: Fri Feb 29, 2008 12:13 am
by Pascal TOURNOIS
Have a look at http://www.a-bike.co.uk/store/home.php

I don't know if it's been posted here before, but I think it's great news.

PostPosted: Fri Feb 29, 2008 8:16 am
by Weakling
Great News indeed. Thanks for providing this. That explains why they have been out of stock for so long then. They wanted to sell the improved one.

Will it stand a rider with higher weight than 85 kg then? Or does the bike just get longer life with the 80 kg owners?

Good that they listen to advice from customers.

PostPosted: Fri Feb 29, 2008 9:30 am
by Pascal TOURNOIS
The good news is also that the first batch of A-bikes must have proved sufficiently profitable to bother producing an improved version.

That means the A-bike will not sink without a trace like most Sinclair products have since the days of the Z88 computer.

Great news, indeed!

PostPosted: Sat Mar 01, 2008 4:06 am
by Binch Shin
Very good news!!
I indeed hope to see the new one :shock:

PostPosted: Sat Mar 01, 2008 9:37 am
by Weakling
A guy here in Sweden found a good replacement for the seat, as others has done too. He find it much easier now to use the A-bike when he has a seat with much more comfort. It is a "foldable" seat. Make the bike just a tad bigger when folded.

I'm surprised he hasn't told us about it. But he is very buisy with his work.

PostPosted: Sat Mar 01, 2008 11:15 am
by Jon Laurence
Hey Weakling. How is the Swedish seat comparing with mine (a Taiwan seat)?

8)

Jon

PostPosted: Sun Mar 02, 2008 12:15 pm
by Weakling
Jon, here is my answer. I found a good thread to put it in.
http://abikecentral.com/forum/viewtopic.php?t=213&postdays=0&postorder=asc&start=0

my original post

He send me an answer but I forgot to tell him to write in English so
now I need to find the right words in English. Which I maybe will fail
to find cause I don't even know the Swedish words he used.

Does the brand Velo sounds familiar. As I get him he used standard parts.

I link to pictures tomorrow. Too late now 00.05

EDIT

I start a new thread about it. This one should be about the

Some news about A-bike mark II

I don't mind a bit of derail. But if it goes on for too long the newcomers to
the thread don't find what they look for so me try to start a new one.

Re: Some news about A-bike mark II

PostPosted: Sun Mar 02, 2008 6:37 pm
by Amuro Lee
Pascal TOURNOIS wrote:Have a look at http://www.a-bike.co.uk/store/home.php
I don't know if it's been posted here before, but I think it's great news.

Here is the flash file of the announcement.
http://www.a-bike.co.uk/store/flash/page2.swf

I've captured the text from it. :P
Image

PostPosted: Tue Mar 04, 2008 12:45 pm
by Oleg
I think that is very good news. Especially the part about freewheel because I do not trust in long live this a-bike component.

Bad news from the distributor of A-bike in Hong Kong :(

PostPosted: Thu Mar 06, 2008 5:32 pm
by Amuro Lee
Bad news from the distributor of A-bike in Hong Kong :(
Lewis from MHM, Hong Kong wrote:Subject: Re: Mark II A-bike
Date: Thu, 6 Mar 2008 17:45:22 +0800
From: "Lewis" <mhm@xxxxxxxx.hk>
To: "Amuro Lee" <amurolee@xxxxx.com>

Hi, Amuro,

After further conversation with the factory, A-Bike Mark II will not be available so soon. We will keep you informed. Thank you for your support.

Best regards,
Lewis

PostPosted: Sun Mar 09, 2008 12:47 am
by newcross
freewheel, alminium tubing, seat, ah all the things we wanted to be improved!! I hope it come out before summer.
:D

Some news about A-bike mark II

PostPosted: Sun Mar 09, 2008 9:22 pm
by alexko
Is there any information on new gears? Now, if pedaling rate is one turn per second (the most comfortable pace for me personally) the a-bake gears provide 11.7km/hr. Total gears rate is 6,8 and one circle of pedaling moves the bike in 3256 mm travel lengh. With this pedaling rate I feel no any resistance from pedals (on flat terrain profile). Therefore, I think, the optimal gears rate must be not less then 9,0-9,5 for 6'' wheels. Sure, length of cranks should be increased up to the standad size.

Re: Some news about A-bike mark II

PostPosted: Tue Mar 11, 2008 12:23 am
by newcross
alexko wrote:Is there any information on new gears? Now, if pedaling rate is one turn per second (the most comfortable pace for me personally) the a-bake gears provide 11.7km/hr. Total gears rate is 6,8 and one circle of pedaling moves the bike in 3256 mm travel lengh. With this pedaling rate I feel no any resistance from pedals (on flat terrain profile). Therefore, I think, the optimal gears rate must be not less then 9,0-9,5 for 6'' wheels. Sure, length of cranks should be increased up to the standad size.


I haven't heard anything on the gear of Mk-II, but i suspect the gear ratio will stay the same. I did quastion the A-bike designer about the gear ratio, and her said that it was intentional to make the gear ratio as light as it is now.

I think this decision was made in order to avoid stress (from pedaling) on the structure as much as possible. With heavier gear, A-bike would do just fine with flat road, but something like climing a small hill become more difficult and IF a user try pedaling the A-bike in standing position (+ maybe twisting as well) could destroy the A-bike into pieces...

I know this sounds silly, but I guess A-bike team cannot really take chances as manufacturer --- their A-bike is not full-metal bike in the end of the day, you know.

Personally I'd love to have heavier gear on my A-bike, but I haven't really got time to work on the 15T gear project right now. :oops:

so my bet is that Mk-II will be structurely enhanced, but not functionaly. :roll:

PostPosted: Tue Mar 11, 2008 3:43 pm
by kenwshmt2
so my bet is that Mk-II will be structurely enhanced, but not functionaly. :roll:


Having broken 2 of them, structural enhancement will make it more functional. :?

PostPosted: Tue Mar 11, 2008 3:52 pm
by newcross
kenwshmt2 wrote:
so my bet is that Mk-II will be structurely enhanced, but not functionaly. :roll:


Having broken 2 of them, structural enhancement will make it more functional. :?


hahaha, yes, that's quite right. Having total of three rear frame tubes cracked, I personally welcome strengthened aluminium tubing the most welcome. :lol:

I hope the strengthen parts canbe installed to the original A-bike too, something like 'upgrade kit'?